Straight Tuck Boxes

When to use Straight Tuck End Boxes with Sombrero Holes on the Header

Are you looking for a packaging solution to hang on your wall? Choose straight tuck-end boxes with sombrero holes in the header. The header has a sombrero hole punched out of it, which makes it possible to hang the box from the hangers that are provided. These boxes can be used for various products ranging from light to medium weight. This type of machine is suitable for different products and can be used in multiple industries.

Custom Straight Tuck End Boxes Are Assembled Based On Your Specifications.

A standard tuck-in flap at the bottom of the box makes closing it pretty straightforward. The side flaps must be tucked in first, followed by the closing flaps. In the case of the top of the box, the same principle is applied, although with the addition of a header. First, the header of the box folds over towards the inside of the box. Following the folding of the side flaps, the tuck-in flap is folded into place to secure the entire top of the box. The process takes longer than Straight Tuck End boxes without headers, but it is still very quick. 

Straight Tuck End Box With Sombrero Hole On Header Paper Options

The most common choice for retail packaging is SBS paperboard. Eighteen points of thickness are suitable for lightweight products, while 24 points are on the heavier end of the scale and are suited for bigger boxes that need more weight. There are two types of paper surfaces: coated and uncoated. Special paperboard options are available on request.

Finishing Options For Straight Tuck End Boxes With a Sombrero Hole On the Header

Adding coatings to your packaging can make it even more eye-catching. If you wish to add extra protection and durability to your STE box with a sombrero hole on the header, you may choose to laminate it or apply a semi-gloss AQ coating to enhance the visual appeal of your product. Depending on the coating you choose, your packaging can be finished in matte, gloss, or semi-gloss finishes.